• Compact and powerful NTP Time Server for small networks
• Synchronises clocks and computers on the LAN
• Wall or rack mounted
• Can reply to more than 250 NTP requests per second
• Requires link to GPS4500 for operation
• Master clock & Time Server in one device
• Synchronises clocks and computers on the LAN
• Rack mounted
• Can reply to more than 250 NTP requests per second
• Requires link to GPS/GNSS for operation
• Master clock & Time Server in one device
• 6 separate circuits for Slave Clocks
• Synchronises clocks and computers on the LAN
• Rack mounted
• Can reply to more than 250 NTP requests per second
• Requires link to GPS/GNSS for operation
• NTP Time Server
• Synchronises clocks and computers on the LAN - IPV4 or IPv6
• Rack mounted
• Two completely separated LAN ports
• Output for up to 100 impulse/Mobaline slave clocks
• Can reply to more than 1,500 NTP requests per second
• Requires link to GPS/GNSS for operation
• Multipurpose NTP Time Server
• Synchronises clocks and computers on the LAN - IPV4 or IPv6
• Rack mounted
• 2 x IRIG-B/AFNOR outputs
• Output for up to 100 impulse/Mobaline slave clocks
• Can reply to more than 1,250 NTP requests per second
• Requires link to GPS/GNSS for operation
• Multipurpose NTP/PTP Time Server for large networks
• Synchronises clocks and computers on the LAN - IPV4 or IPv6
• Rack mounted
• 2 x IRIG-B/AFNOR outputs
• 4 completely separated LAN ports
• Can reply to more than 10,000 NTP requests per second
• Requires link to GPS/GNSS for operation
• Multipurpose NTP/PTP Time Server for large networks
• Synchronises clocks and computers on the LAN - IPV4 or IPv6
• Rack mounted
• 2 x IRIG-B/AFNOR outputs
• 16 completely separated LAN ports
• Provides PTP on 12 ports
• Provides NTP on 4 ports (>5’000 request/s per port)
• Requires link to GPS/GNSS for operation
The new GNSS 4500 is designed as all-in-one device, i.e. antenna and receiver module are equipped together in one single housing, protected to survive the outdoor installation requirement with Ingress protection degree IP 65.
Email your enquiry
Time Servers require connection to a GPS unit as a time source for operation
Email your enquiry
The SP4500 unit is installed between the external GPS unit and the Time Server to act as a circuit breaker
Email your enquiry
The DTS-2440.audio clock provides the answer, the device may be used to announce the time (speaking clock), but it may also be used as a radio time signal generator
Email your enquiry